Three cuff lengths Locator Abutments for KAT implants!

 

Locator Abutments are provided in 2.5, 3.5 and 4.5 cuff lengths.

All Locator Abutments are compatible with all implants of KAT System – from long-term tom-KAT mini implants (2.5 and 3.1 mm diameters) to Really Wide Implants™ (6.5 and 8.0 mm diameters).

2.5, 3.5 and 4.5 mm cuffs

Locator Abutment Placement

 

Place Locator Abutment over the implant post. Inset the tip of the Locator Placement Instrument inside the abutment. Apply three moderate taps to the Placement Instrument with a surgical mallet.

Housing groove ---->

4.1 mm diameter

Locator Abutment 2.5 mm - 01714

Locator Abutment 3.5 mm - 01715

Locator Abutment 4.5 mm - 01716

Locator Abutment Placement Instrument - 008015

Choosing the correct cuff length

Implants placed with post exposed through gum tissue.

The top of the implant post corresponds the base of the housing groove

2.5 mm cuff height shown. Housing groove is not above gum tissue. This is too short.

 

A 2.5 cuff length is generally appropriate if the top of the implant post is 0.5mm above the gum tissue

3.5 mm cuff height shown. Housing groove is above gum tissue. This is an appropriate choice.

 

A 3.5 cuff length is generally appropriate if the top of the implant post is exposed or submerged 0.5mm below the gum tissue

4.5 mm cuff height shown. Housing groove is well above gum tissue. This is too tall.

 

A 4.5 cuff length is generally appropriate if the top of the implant post is submerged 1.5mm below the gum tissue

1 mm

bone position

Reamer LB (Locator and Ball Abutments) is used to remove bone excess prior to abutment placement

Locator Abutment Removal

 

Attach Locator Abutment Removal Tip to Abutment Remover using included wrench set. Insert the Removal Tip into the abutment grooves as pictured, make sure the tip is fully inserted in the grooves. Place cotton gauze over the abutment and activate the lever of the Abutment Remover. Abutment will be removed with one tap.

Locator Abutment Removal Tip - 008022

Abutment Remover - 0021059

Used to remove Locator and Ball Abutments

Invented and made in USA. US Patents 8,398,400, 8,469,710 and 8,734,155. EU Patent 2046238.

© 2013 KAT Implants. All rights reserved.